Description
Detail
MOVING PART FOR C.BREAKER SWITCH-DISCONNECTOR SACE EMAX2 E6.2X/F/MS 5000 FOUR-POLE FULL SIZE NEUTRAL
Specification
Rated permanent current at AC-23, 400 V : 5000 A
Version as reversing switch : No
Voltage release optional : Yes
Motor drive optional : Yes
Suitable for intermediate mounting : No
Suitable for distribution board installation : Yes
Suitable for front mounting centre : No
Suitable for front mounting 4-hole : No
Suitable for ground mounting : No
Version as maintenance-/service switch : No
Version as safety switch : No
Version as main switch : Yes
Version as emergency stop installation : No
Motor drive integrated : No
Interlockable : No
Rated operating voltage : 690 – 690 V
Degree of protection (IP), front side : IP30
Max. rated operation voltage Ue AC : 690 V
Rated short-time withstand current lcw : 120 kA
Rated operation power at AC-23, 400 V : – kW
Number of auxiliary contacts as normally open contact : –
Number of switches : 0
Switching power at 400 V : – kW
Number of auxiliary contacts as change-over contact : –
Rated operation power at AC-3, 400 V : – kW
Number of poles : 4
Rated permanent current Iu : 5000 A
Number of auxiliary contacts as normally closed contact : –
Rated permanent current at AC-21, 400 V : 5000 A
Conditioned rated short-circuit current Iq : – kA
Device construction : Built-in device slide-in technique (withdrawable)
Type of electrical connection of main circuit : Bolt connection