TeSys F reversing contactor, 3p(3 NO) AC-3 <= 440 V 115A, without coil. range: TeSys - product name: TeSys F - device short name: LC2F - contactor application: motor control, resistive load - utilisation category: AC-1, AC-3 - device presentation: preassembled with reversing power busbar - poles description: 3P - pole contact composition: 3 NO - [Ue] rated operational voltage: <= 1000 V AC 50/60 Hz, <= 460 V DC - [Ie] rated operational current: 115 A (<= 55 °C) at <= 440 V AC AC-3, 200 A (<= 40 °C) at <= 440 V AC AC-1 - motor power kW: 30 kW at 220...240 V AC 50/60 Hz, 55 kW at 380...400 V AC 50/60 Hz, 59 kW at 415 V AC 50/60 Hz, 59 kW at 440 V AC 50/60 Hz, 65 kW at 1000 V AC 50/60 Hz, 75 kW at 500 V AC 50/60 Hz, 80 kW at 660…690 V AC 50/60 Hz - auxiliary contact composition: 1 NO - overvoltage category: III - [Icw] rated short-time withstand current: 1100 A <= 40 °C 10 s, 320 A <= 40 °C 10 min, 400 A <= 40 °C 3 min, 520 A <= 40 °C 1 min, 640 A <= 40 °C 30 s - associated fuse rating: 125 A aM at <= 440 V, 200 A gG at <= 440 V - [Ui] rated insulation voltage: 1000 V conforming to IEC 60947-4-1, 1500 V conforming to VDE 0110 group C - interlocking type: mechanical - mounting support: plate - standards: EN 60947-1, EN 60947-4-1, IEC 60947-1, IEC 60947-4-1, JIS C8201-4-1 - product certifications: ABS, CB, CCC, CSA, DNV, LROS (Lloyds register of shipping), RINA, RMRoS, UL - connections - terminals: control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - with cable end, control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end, control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end, control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end, control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end, control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end, power circuit : bar 2 x ( 20 x 3 mm), power circuit : connector 1 cable(s) 95 mm², power circuit : lugs-ring terminals 1 cable(s) 95 mm² - tightening torque: control circuit : 1.2 N.m, power circuit : 10 N.m.