Eaton DILM40 (400V50HZ 440V60HZ) 3 Pole AC operated contactor with screw terminals. The 277768 XTCE040D00I3 contactor is suitable for motors with efficiency class IE3. Voltage peaks must be avoided when controlling the contactor directly from the PLC. This is why all DC contactors feature integrated suppressors ex-works. They ensure that very short switch-off times can be realised. The limitation of the DC pick-up power is decisive here. The new contactors DIL M up to 38A can be controlled from a PLC by 0.5A DC outputs. The PLC outputs are subject to a significantly lower load. The holding power has been minimised. For example a DILM38 requires a holding power of just 0.5W. It is therefore unnecessary to have to consider the utilisation factor or maximum current carrying capacity. Simpler mounting, even different conductor cross-sections are now safer to wire.