Description
Detail
The S802PV-M100-H Is A 2-Pole Polarized Disconnector For Photovoltaics. It Can Be Used For Currents Up To 100A And Has A Rated Operational Voltage Of 1000V DC By Only 54mm Width. The Rated Short-Term Withstand Current Icw Is 1.5kA. The S802PV-M100-H Complies With IEC/EN 60947-3. It Has Numerous Of Approvals, Therefore It Can Be Used Worldwide. The Extensive Range Of Accessory Makes The Use Of S802PV-M100-H More Comfortable.
Specification
Suitable for ground mounting : No
Rated permanent current at AC-23, 400 V : – A
Rated operating voltage : 800 – 800 V
Interlockable : No
Motor drive integrated : No
Version as emergency stop installation : No
Version as main switch : Yes
Version as safety switch : No
Version as maintenance-/service switch : No
Max. rated operation voltage Ue AC : 0 V
Suitable for front mounting 4-hole : No
Suitable for front mounting centre : Yes
Suitable for distribution board installation : Yes
Suitable for intermediate mounting : Yes
Motor drive optional : No
Voltage release optional : Yes
Version as reversing switch : No
Rated operation power at AC-3, 400 V : – kW
Type of electrical connection of main circuit : Flat plug-in connection
Type of control element : Toggle
Colour control element : Black
Device construction : Complete device in housing
Conditioned rated short-circuit current Iq : – kA
Rated permanent current at AC-21, 400 V : – A
Number of auxiliary contacts as normally closed contact : –
Rated permanent current Iu : 100 A
Degree of protection (IP), front side : IP20
Number of poles : 2
Number of auxiliary contacts as change-over contact : –
Number of switches : 8500
Rated operation power at AC-23, 400 V : – kW
Switching power at 400 V : – kW
Number of auxiliary contacts as normally open contact : –
Rated short-time withstand current lcw : 1.5 kA